|
||||
O | Construction TermsThe glossary below contains construction terms commonly used by architects and contractors. Simply click on any letter below for a detailed list of construction terms and definitions.O C - On Center The measurement of spacing for studs, rafters, and joists in a building from the center of one member to the center of the next. Oakum Loose hemp or jute fiber that's impregnated with tar or pitch and used to caulk large seams or for packing plumbing pipe joints. Open Hole Inspection When an engineer (or municipal inspector) inspects the open excavation and examines the earth to determine the type of foundation (caisson, footer, wall on ground, etc.) that should be installed in the hole. Oriented Strand Board or OSB A manufactured 4' X 8' wood panel made out of 1"- 2" wood chips and glue. Often used as a substitute for plywood. Outrigger An extension of a rafter beyond the wall line. Usually a smaller member nailed to a larger rafter to form a cornice or roof overhang. Outside Corner The point at which two walls form an external angle, one you usually can walk around. Overhang Outward projecting eave-soffit area of a roof; the part of the roof that hangs out or over the outside wall. See also Cornice. |
|
||
Contact Burton Realty | Conyers, GA Homes |
Burton Home Page
